Phone: (585) 768-2500

About our

Vinyl Application Company


At Unitech Applications, we believe in providing exceptional vinyl installation services that exceed our customers’ expectations. With over 30 years of experience, we have honed our skills in applying vinyl graphics on various surfaces. We conduct ourselves with honesty, integrity, and professionalism in all our business relationships. We aim to complete projects quickly and efficiently while providing exceptional customer service. We are proud to have led the industry in developing and perfecting the vehicle full wrap process and decal installation.


Unitech Applications specializes in vinyl wrap services, with a focus on perfecting the vehicle full wrap process and decal installation. Our team has extensive experience installing vinyl films on various surfaces, including lightly textured walls and corrugated trailers, and we can handle projects of any size and complexity. We also provide expert removal of old or unwanted vinyl graphics to ensure a clean finish.


Unitech Applications is a nationwide leader in the vinyl graphic installation industry, with a focus on putting our customers’ needs first. With over 30 years of experience and a commitment to staying up-to-date with the latest technological advances in the industry, our owner Guy Laesser is personally involved in every project, bringing his attention to detail and dedication to fine workmanship to every job site. Through our membership in UASG and our extensive network of professional installers, we can efficiently schedule and coordinate all aspects of your advertising campaign while ensuring complete customer satisfaction.




A Wrap is a large vinyl graphic or decal. It is applied directly over the original paint of the vehicle. The application of the Wrap allows you to change the vehicle’s appearance in a very short period of time and in turn allows you to remove the Wrap, returning the vehicle back to it’s original condition if necessary.
Vehicle wraps, bus wraps and fleet wraps are comprised of three phases. The first is the design phase which includes getting accurate measurements for the vehicle and actual design of the graphics to be applied. The second is the production phase where the graphic is printed and then laminated to protect the vinyl from abrasions and UV rays that can cause graphics to fade over time. The third phase is installation where the vinyl is actually applied to your vehicle. In some cases there may even be a fourth phase, the removal of graphics if requested.
Anything less than a full wrap is normally called a “partial wrap.” ½ partial wrap normally includes the entire rear of the vehicle and ½ way up the vehicle, and includes a hood logo. ¾ partial wrap normally includes the entire rear of the vehicle and ¾ way up the vehicle, and includes a hood logo. Typically, a Full Wrap includes the entire surface of the vehicle.
Normally, you can leave a wrap on between 1 to 6 years. Life of your wrap depends on many factors but the main factor will be exposure to the sun. In general, a high performance cast vinyl wrap using solvent long life inks and a UV protective over laminate can last 3 to 6 years.
In most cases vehicle wraps will not damage factory paint jobs. Paint in poor condition may peel when vinyl is removed.
Yes. All vehicles have to be free of dust, mud, wax, oil, armor-all type products, and other agents that may prevent the vinyl from adhering to the vehicle surface during the installation process. Even if you clean the vehicle yourself Unitech Applications will still do extensive prep work to the vehicle to ensure it is ready for the vehicle wrap. Most vehicles need to be high pressure washed with detergent. After washing, it is also critical to prep the vehicle surface with degreasers, alcohols and other solvents.
Yes. Unitech Applications utilizes a software program that has accurate dimension of most standard production run cars, trucks, vans, and trailers. This program will be used to design the wrap but accurate measurements will need to be taken prior to production of the wrap.
Time to do wraps vary widely from project to project. However, in general vehicle wraps can be done in significantly less time than painting. Paint jobs normally require curing and drying time and much more preparation than a vehicle wrap. Often a full wrap applied by Unitech Applications on a standard automobile can be done in one to two days.
Yes. You can normally have the damaged pieces or panels of your vehicle wrap replaced after your vehicle is repaired. You normally do not need to redo the entire wrap if the damage is limited to certain areas of the vehicle.
Hand washing is best. Try to avoid high pressure washes and be careful never to use an ice-scraper on window graphics
There are several things to consider: Design Time, Materials (including vinyl and lamination), Print, and Installation. Size of the vehicle, amount of the vehicle to be wrapped and type of vehicle play a part in cost. In general, vehicles with compound-curves, or indention’s, like a VW Bug or PT Cruiser are more difficult and more expensive to wrap than a box van with flat surfaces. Partial wraps are a great way to minimize cost as opposed to a full wrap. Cast vinyl which is used on vehicle wraps is more expensive and lasts longer than the calendered vinyl which is used for general signage.
If you are using your vehicle wrap as signage there is no more cost-effective advertising method available. It has been proven that the cost per impression of vehicle wraps is less than other forms of advertising such as billboards, television, radio and yellow pages. If you are using your vehicle wrap to improve the appearance of your vehicle, digitally printed vehicle wraps can simply not be duplicated by other methods such as paint or air brush.
Yes, in most cases, if you follow guidelines from Unitech Applications. In general, all vinyls tend to be harder to remove the longer they remain on the vehicle because the adhesives tend to build up a bond over time. Heat is often used to soften the vinyl and its adhesive in order to assist in the removal of the vinyl. There are also special chemicals and special tools available to assist in the removal of vinyl.
You can see through window graphics that are printed on perforated window film. Window perf vinyl is vinyl that is perforated with very small holes that allow you to see out. From inside the vehicle visibility is similar to regular window tint. From the outside the graphic is visible. For safety reasons the front windshield and front driver and passenger windows are not able to be covered. Rear windshield and rear windows on passenger and driver side doors can normally have vinyl graphics.
No. Wrinkles and bubbles are not acceptable.
Cost – Take billboards for example. Average billboard prices are $500 to $600 per month or $6000 to $7200 per year. Average wrap prices range from $2000 to $3500 for a three year advertisement. Broken down, you are spending $56 to $98 per month for what is essentially a rolling billboard. Turn your gas dollars into advertising dollars! Impact – A recent poll shows that: 90% of travelers notice graphics on wrapped vehicles which translates to 20,000 to 70,000 daily vehicular impressions. 75% of consumers form impressions about a company based on the fleet graphics. 30% of consumers base buying decisions on impressions they receive from company vehicles. Less Regulation – You do not need a permit for your wrap as you would with most any other sign. You own it! –Many forms of advertising, like billboards or radio are simply a rented amount of time. Not vehicle wraps, you own the graphic and the vehicle.
With vehicle wraps your creativity and design possibilities are limitless as opposed to paint. For example, it is very difficult to paint a photograph, but very easy to digitally reproduce a photograph. Paint simply cannot duplicate what is possible with digitally printed vinyl vehicle wraps. Vinyl vehicle wraps are also a great way to protect your original paint underneath. Finally, it is much easier to change your vehicle wrap vinyl graphics than to change a paint job.

Want to Work With Us?

Unitech Applications is a high volume, professional quality driven company. If you are a professional vinyl graphic installer Unitech Applications is interested in having you fill out an employment application. We are always looking for the best of the best when it comes to high quality professional installers nationwide.